Substation Automation Solutions for Steel Plants

We offer Automation Solutions for Steel Plants for boosting the efficiency of operations and avoiding unnecessary breakdowns.? We also provide training in our new installation for operation and maintenance staff of client to better understanding technology, thus increasing the plant efficiency.?

Our Automation Solutions for Steel Plants are as follows:?

Engineering Solutions:

?Momentary Paralleling Schemes & Fast Bus Transfer schemes

A bus transfer system is designed to provide process continuity to the loads attached to a motor bus while transferring the bus from one source to another. A successful bus transfer under contingent conditions provides immense value and benefits to continuous process operations that cannot afford an interruption of power supply to plant auxiliaries.?

We are experienced in designing and implementing such schemes for substations.? This can be done as a retrofit in existing panels or supplied as a new panel as per station condition and requirement.

Load Shedding scheme

During overloads in the mains, the load shedding applied to interruptible loads is often the only solution to keep the industries in operation. Normally, in such cases, non-critical loads that are earlier identified are tripped automatically to avoid interruption of critical loads and induced penalties when power is being drawn from the grid.?

We offer a range of products and solutions from Siemens/Schneider for these critical operations based on Current, Power or frequency for load shedding.

Power System Studies and Relay Coordination?s

Relay coordination study and analysis is performed to make sure that safety operation of the system are functioning correctly and to avoid the nuisance tripping, as protection is a major concern in any industry and they rely on protective devices for the same.?

????????The aim of a coordination study is to determine the characteristics, ratings, and settings of overcurrent protective devices which will ensure that minimum unfaulty load is interrupted when protective devices isolate a fault or overload anywhere in the system.

Protection System Upgradation/ Retrofits with Modern Numerical Relays

Older relay usually outdated, are supposed to be replaced in industries to avoid mal tripping and ease operations in a plant. We offer?

Replacement of old Electromechanical Relays with Numerical Relays
Replacement of Outdated Numerical Relays with Latest Models
Upgradation of existing SCADA system
Integration of additional Devices into existing SCADA

????????????Our team is experienced in carrying out such services in all types of industries, from data collection, to upgradation and handing over.?

Outage Loss Monitoring meters

Outages can cause losses in an industry. These outages are often classified as Controlled outage (normal shutdown) or uncontrolled outage (fault trip). Our meters are specifically designed to register such outages in Minutes or seconds and report to automation system. This helps in evaluation of losses on per day, per month or per year basis.?

Testing and AMC Solutions

Testing of Substation Equipment?s

Testing of substation equipment?s is a critical task with several standards defined for each equipment for testing. This ensures a proper operation in the substation in the team of experts can give you all kinds of Testing and commissioning?of Substations. We can work all across the voltage levels LV, MV, HV and EHV. We have our own advanced testing equipment to carry out necessary testing of?the substation and to get the work done quickly without depending on anybody.?

Maintenance for Breakers

Service life of a breaker is a parameter linked to maintenance of the breaker. Servicing reduces the issues of aging with the breaker and maintains smooth operation of the breaker during the life time.? We do breaker servicing that involves

Cleaning of breaker with CRC
Removal of old grease and re-greasing the same with recommended grease.

Energy Meter Calibration?

The energy meter is heart of the power supply network. If the energy meter is correct the consumption recorded and the billing is correct. If the energy meter is not correct we lose on all fronts. Therefore the energy meters are required to be checked tested and calibrated on regular intervals.

Automation Solutions

Substation? Automation using RTU/PAS
Energy Monitoring Solutions and IOT Linkup for Clients

In this Energy monitoring system, SCADA is used to?visualize current reading of energy meters?as well as to collect the historical data for future usage. Also, SCADA is used to generate the report of necessary readings like power consumption in the hourly, daily, weekly and monthly format. We also provide IOT link for the metering scada for remote monitoring of the meter data.?

Critical Alarm Scada

To efficiently manage alarms, your SCADA system needs an alarm priority scheme. All prioritized alarms should first be based on safety, and then on potential economic impact. Critical alarm scada is a low cost scada that helps you monitor the critical alarms in the substation and take decisive action before any mishap.?

Product Supply Solutions

We are channel partners of Siemens and traders for Schneider, GE and ABB. We supply various products from OEMS with add on services for proper installation. We Supply:

Numerical Relays.
Switchgears?
Switchgears?
Control and relay panels
Power Quality Meters
Auxiliary Relays
Automation Products
Siemens Motors

Rental Solutions?

Testing kits are an integral part of testing. A Good test kit ensures proper testing procedure and reliable test results. We offer omicron (Austria) make kits that are No.1 in field testing and recommended by experts. We offer: