Socomec 40A 4 Pole(4p) ATyS S Remotely operated Transfer Switches (RTSE)

Socomec 40A ATyS S?products are 4 pole remotely operated transfer switches with positive break indication. They enable the on-load transfer of two three-phase supplies via remote volt-free contacts, from either an external automatic controller, using pulse logic, or a switch.
They are intended for use in low voltage power supply systems where a brief interruption of the load supply is acceptable during transfer.

Weight : 4000.000 in Gram
Brand : Socomec

Technical Specification
Model: ATyS S
Pole: 4 Pole

Advantages
Extensive power supply range
The ATyS S is available in four supply versions, each with a broad range (+/-30%). The four versions are:

• 12 VDC power supply.
• 24/48 VDC power supply.
• 230 VAC single power supply.
• 2 x 230 VAC dual power supply.

Safety and reliability
ATyS S products use stable position technology, ensuring constant pressure on the contacts and preventing premature faults. In addition, they do not require a power supply to maintain position, thus protecting their loads from voltage fluctuations.

Easy integration
ATyS S products can be easily installed inside enclosures. Their design, and in particular their compact size, enables integration within most 200 mm deep enclosures.

Simplified maintenance
Maintenance can be carried out easily under load, with manual operation still available. The control and motorisation section can be replaced simply by removing 4 screws, with no work required on the installation cabling.

ATyS d S: Dual power supply
In addition to the functions offered by the ATyS S, the ATyS d S incorporates supply redundancy without the need for additional wiring.This is obtained by integrating a double
supply (2 independent supplies) directly within the product.

The solution for

• Genset < 90 kVA
• Heating systems
• Climate control
• Ventilation systems
• Telecommunications

Strong Points

> Extensive power supply range
> Safety and reliability
> Easy integration
> Simplified maintenance
> ATyS d S: Dual power supply

Conformity to standards
> IEC 60947-6-1
> IEC 60947-3
> GB 14048-11

We also provide SOCOMEC transfer switches required for different applications in industry grids.

A. SOCOMEC Transfer Switches:
Full range of Manual, Remotely Operated and Automatic Transfer Switches from 16 to 6300 Amps. Providing an unrivalled benchmark in source switching, SOCOMEC is continuously innovating to ensure ever more efficient ways to guarantee the continuity of distribution and, therefore, the rate of availability of your energy. From compact manual transfer switches to the enclosed ATS Bypass, the range of switches covers, as standard, the majority of your switching needs.

1. Automatic transfer switches range
a. ATyS tM, Gm & pM : Modular and compact Automatic Transfer Switch from 40 to 160A

b. ATyS t, g & p:
All-in-one Automatic Transfer Switch for all applications from 125 to 3200A
c. ATyS Bypass:
Enclosed Automatic Transfer Switching Equipment with Bypass from 125 to 3200A
d. STATYS:
Static Transfer Switch for IT applications with no downtime during transfer from 16 to 1600A

2. Remotely operated transfer switches range
a. ATyS S, ATyS d S:
Motorized and Remotely Operated Transfer Switch from 40 to 125A
b. ATyS d M:
Motorized and Remotely Operated Transfer Switch modular from 40 to 160A
c. ATyS r and ATyS d :
Motorized and Remotely Operated Transfer Switch from 125 to 3200A
d. ATyS d H :
Motorized and Remotely Operated Transfer Switch from 4000 to 6300A

3. Manual transfer switches range:
a. SIRCO M :
Compact Modular Manual transfer switches from 25 to 125A
b. SIRCO VM1 :
Modular Manual transfer switches with visible breaking from 63 to 125A
c. SIRCOVER :
Manual transfer switches from 125 to 3200A
d. SIRCOVER ATS Bypass :
Manual switch to perform bypass on ATS product from 125 to 1600A
e. SIRCOVER PV:
Manual transfer switch for DC or photovoltaic applications from 200 to 630A

To explore the comprehensive range of SOCOMEC electrical switches and UPS, click here!